EBS Electrical Box Sinkers & Accessories

EBS Logo

 

DRILL A SQUARE HOLE IN UNDER 2 MINUTES - IN THE HARDEST MATERIALS

All the accessories and adaptors needed to drive the EBS range of cutters. Cutters do come with the adaptors built in but they can be bought separately to replace damaged items.

EBS Tri-Cut Single Box - Step by Step

1 Pilot 2 EBS round 3EBS square 4 EBS HM Chis 5 Single back box

When drilling in hard materials use a Hard Material Chisel

 

EBS Double Box - Step by Step

1 EBS Pilot 2 Double Template 3 EBS round 4EBS DBL Square 5 Double Back Box  

When drilling in hard materials use a Hard Material Chisel

 

 

Single Box Sinker Set

Part No: EBS.TC.SET

Complete Box Sinking & Channelling Set

Part No: EBS.TCINST.SET

EBS TC SET EBS TCINST SET
Tri Cut with DustColl

Round Cutter with Dust Collection

Not sold as an individual part

Tri Cut with DustColl

Round Cutter with Dust Collection

Not sold as an individual part.

Square Cutter (small)

Square Cutter

Individual Part Number: EBS.SQUARE.SET

Square Cutter (small)

Square Cutter

Individual Part Number: EBS.SQUARE.SET

    Double Square Cutter (small)

Double Square Cutter

Individual Part Number: EBS DOUBLE BOX

HM Chisel

Hard Material Chisel

Individual Part Number: EBS.BSC.HM

HM Chisel

Hard Material Chisel

Individual Part Number: EBS.BSC.HM

    30mm Channelling Chisel (small)

30mm Channelling Chisel

Individual Part Number: G225B4CC30

6mm SDS Plus bit (small)

1 X 6.0 SDS Plus Hammer Drill Bit

Part Number: S06.0X160

SMP160 (small)

5 X 6.0mm SDS Plus Hammer Drill Bit

5 Piece Part Number: SMP160

    Double Spacing Template (small)

Double Hole Spacing Template

Part Number: RCEBSDBLTEMP

 

 

EBS Individual Components & Accessories

 

Square Cutter (small)

EBS Square Cutter c/w SDS Plus Adaptor

Part Number: EBS.SQUARE.SET

Tri-Cut alone (small)

EBS Tri-Cut Cutter c/w SDS Plus Adaptor

Part Number: EBS.ROUND.SET

EBS Double Cutter

EBS Double Square Cutter c/w SDS Plus Adaptor

Part Number: EBS DOUBLE BOX

Tri Cut wih Max Adaptor

EBS Tri-Cut Cutter c/w SDS Max Adaptor

Part Number: EBS.ROUND.SETMX

Double Spacing Template (small)

Double Hole Spacing Template

Part Number: RCEBSDBLTEMP

HM Chisel

Hard Material Chisel

Individual Part Number: EBS.BSC.HM

Dust Collection Unit (small)

EBS Dust Collection Shroud and Drive Adaptor

Part Number: EBS.DEXT.ASSY

6mm SDS Plus bit (small)

6.0 X 160mm SDS Plus Pilot Drill Bit

Part Number: S06.0X160

DL100B4IG (small)

SDS Plus Drive Adaptor for EBS Square Cutter

Part Number: DL100B4IG

DL100B4IP (small)

SDS Plus Drive Adaptor for EBS Round Cutter

Part Number: DL100B4IP

EBSDEXTAdaptor (small)

SDS Plus Drive Adaptor for EBS Round Cutter c/w Dust Colection Unit

Part Number: EBS.DEXT.ADAPTOR

DL100B4IGDB

SDS Plus Drive Adaptor for EBS Square Cutter

Part Number: DL100B4IGDB

DL210MXP (small)

SDS Max Drive Adaptor for EBS Round Cutter

Individual Part Number: DL210MXR

   

 

 

Electrical Box Sinker Merchandising

Various in store merchandising solutions are available. Please contact us for more details.

Product Description Part Number
Complete merchandising Module EBSBOXDEAL1

 

Click below for an online demonstration video

EBS Tri-Cut - Designed for maximum performance in hard materials

 

Electrical Box Sinker

Electrical Box Sinker - Double

Frequently Asked Questions for Electrical Box Sinkers


First things first, how does it work?
Produce a 6mm pilot hole in the wall to locate the position, remove the bulk of the material with the round cutter to the required depth, then square off the hole using either the square cutter or the 80mm wide chisel, depending on the hardness of material.

What type of power tool do I need to use EBS?
You would need an SDS drill capable of rotary/impact and impact only functions (for chiselling). Ideally it would have an approximate weight of at least 2.3kg, a blow energy of approximately 2.4J and a loaded speed of approximately 900rpm.

What setting do I need my drill to be on?
You can use the pilot drill and round cutter on rotary/impact or rotary only. The square cutter can be used on rotary/impact or impact only. The hard material chisel can only be used on impact.

Which materials will EBS sets work in?
The pilot drill and round cutter will work in all masonry materials. The square cutter is designed for use in the softer masonry materials (medium density concrete block,softer brick etc.).In the harder materials (e.g. Engineering brick) you would need to use the 80mm wide hard material chisel for squaring off.

Do I need to turn the rotation off on my drill to use the square cutter?
No,the square cutter has a safety mechanism built into it to stop the whole square from spinning if rotation is left on.You may find it easier, though, to square the hole up on the wall if you use your drill on impact only function.

How do I create a double back box hole?
Either:- Drill two 6mm pilot holes 65mm apart, then use the round cutter twice and square off with the hard material chisel or the square cutter twice
Or:- Use the double back box cutter spacing template to space out the pilot holes on the wall, then use the round cutter twice and square off with the rectangular double back box cutter.

Can I buy spares?
All kit components are available separately, apart from the Round Cutter with Dust Collection which is not sold as an individual part. You can even purchase replacement guide rods for the round and square cutters (Please see website or product catalogues for order codes).

I have lost my pilot drill, what size is it?
The pilot drill is a 6 X 160mm SDS drill bit (code:- S06.0x160).

Can the square cutter be re-sharpened?
Yes. You can do this with a good quality file or a grinder. Be careful not to alter the outer dimensions too much otherwise the square hole may be too small.

< Back to top

Ask Armeg

Contact the specialist tool experts

Get the best tool for the job. Ask an Armeg specialist tool expert.

Request Info
© 2007 Armeg Ltd.
EBS Electrical Box Sinkers & Accessories